VINTAGETRACTORS.COM
AND
RUSTY ACRES RANCH
Wheel, Front
End, and Steering Parts for John Deere G tractors
- 
Behlen Power steering valve with shafts, everything
turns as it should, included is the Behlen Service Manual, $250
9/16-18 lug nut for rear wheels, $1.50 each or set
of six for $7.50
1/2-20 lug nuts for front wheels, $1.50 each or set
of six for $7.50
9/16-18 lug nut for front hubs, stamped with R-(star),
$2.50 each or set of six for $13
New Timken 3383 bearing (same as Deere part number
JD7220, JD 7224, and JD7324) outer front wheel bearing used on
many JD hubs (three available), $30 each
New Timken 2785 bearing (same as Deere part number
7216 ) inner front wheel bearing used on many JD hubs (two available).
$30 each
New Timken 2720 cup (same as Deere part number 7316
and JD 7322) front wheel race used on many JD hubs (three available),
$15 each
New Timken 3320 cup (same as Deere part number JD7346,
JD7320, and JD 7326) front wheel race used on many JD hubs (three
available), $20 each
- 
JD1268R stamped Wheel #3, 4 x 16, minimal rust, some
pitting, very good condtion, $100
- 
JD1268R stamped Wheel #1, 4 x 16, minimal rust, but
needs some rim repair, $50
F628R Transmission cover with F147R support tube, $25
B392R bearing bracket, $12
17 1/2 inch diameter steering wheel with spinner knob,
$25
JD7205R steering bearing. $15 each
- 
Two views of F611R Front pedestal #2, $100 (290 lb)
- 
Two views of F611R Front pedestal #1, $100 (290 lb)
F656R Steering bearing housing, $20
- - 
A491R/AA5521R, steering eccentric bushing, $50
A1423R Retainer cap, $15
C535R Nut and A233R washer for top of steering spindle,
$7
A1553R hub, includes both bearings and retainer, $30
- 
-
A1555R hub cap, $16
AD452R spindle nut, $15
Rollomatic front end parts:
A3472R (AA4098R) LH Knuckle, good bearing surfaces
and good teeth, $65
A3476R Thrust washer, $10
A3477R Knuckle cap, $8, one available
- 
Nearly new 6.50-16 Tire with tube, $40
Good used 6.50-16 tire, $20
B2681R wheel with tire, with good axle and bearings,
$125
B2681R wheel with good axle and bearings, $125
Bearing at bottom of pedestal, $7.50
F859R, 3/4 x 2 1/2 special bolt for hub to cast wheel
center, $3 each
14H402R Nut for F859R bolt, $1 each
B634R rim clamp, $3 each
Stud and bolt for B634R clamp, $2 each
Nut only, $1 each
- 
11 x 38 Demountable rim #5, no rust through, but there
is deep rust on the inner side of the rim, $20
- 
11 x 38 Demountable rim with 15.5-38 tires holds air,
weatherchecks and 40% bar, one only for $135, can ship truck freight
(too large to ship UPS), can remove tire if requested but the
rim itself is also too large to ship UPS