VINTAGETRACTORS.COM
AND
RUSTY ACRES RANCH
Parts for IHC
tractors: Models A, B, C Transmission and Driveline Parts: Clutch,
Transmission, Final Drive, and PTO parts
Pressure plate from a Super C, works well, $45
Clutch disk from a Super C, good lining, $35
Throwout bearing from a C, good condition, $25
Fork for throwout bearing< $14
Propeller shaft for C or Super C, straight with good
splines, $30
351687R1 Torque tube, no breaks or repairs, can ship
UPS, $50
Inspection hole cover on torque tube, $14
Inspection hole cover on torque tube, $10
Implement mounting bolt, $2 each, six available
Clutch pedal from a C, $15
Clutch linkage rod from a C, $14
- 
Propeller shaft coupling parts
for C and Super C: $10
-
Input yoke, $8
351136 R1 Quill with bearing, $10
351141 R1 Shaft cover, $4
Metal shim, $1 each
Input shaft oil seal housing, $10
Input shaft with bearings, $25
20T gear, $20
16T/22T gear, $30
26T/37T gears, Not available
Input shaft with bearings, $25
Input shaft with bearings, $25
20T gear, $20
20T gear, $20
- 
16T/22T gear, $30, your choice
- 
Pinion shaft, $25, your choice
354643R11 (1660248R11) Slinger gear, very good condition,
$80
351054R1 - 45T gear on pinion shaft, $25
= 
24 T gear on pinion shaft, $15 your choice
- 
35T gear on pinion shaft, $20, your choice
- 
39T gear on pinion shaft, $20, as-is, smallamount of
pitting on a few teeth, your choice
16T gear and shaft, $25
Differential from a C, $40
Differential from an A, $30 complete and in good condition
Oil tube for the C, Super C transmission, $15
Threaded retainer for the C, Super C to hold oil tube
in place, $9
BRAKE AND FINAL DRIVE PARTS FROM
AN A:
Pedal, with latch from an A, $8
Brake band and rod with yoke,
$15
Brake drum, $15, 2 available
Rear axle with hub, quill housing,
and bearing in good condtion, $30, two available
PLATFORM AND SHIFTER PARTS C
and Super C:
351132 R1 Platform and transmission
cover, no breaks or repairs, $45
Shifter lever, with pin and swivel,
minimal wear, $30
Shifter forks, $15 each
Complete shift fork assembly
with retainer brackets for C and Super C, $40, your choice
Springs and balls for C shifter,
$10
Differential from a C, $40
Nut and washers on shaft, $5
Differential carrier, $20 each,
two available
Shim for differential carrier, $1 each
Differential shaft to brakes,
$15, two available
REAR AXLE C AND SUPER C:
351119 R1 Bull gear from a C,
$30, two available (32 lb.)
Two hole washer to hold bull
gear to rear axle, $5
C axle with bearing, has been
cut shorter, $20 (38 lb.), two available
351111 rear axle housing with
outer bearing, 44 lb. no breaks or repairs, $30, two available
Quill with oil seal for above
axle housing, $15, two available
PULLEY AND PTO PARTS:
Shaft inside transmission, $30
- 
Belt pulley and housing with
good bevel gear from a Super C, $150
Metal shims for belt pulley housing,
$3 each
- 
Pto housing with driven gear
and pto shaft from a Super C, $95
BRAKE PARTS:
Brake spring, $15 each
Brake or clutch pedal return spring, $6 each, three
for $15
Brake housing, $14 each, two available, left or right;
both for $25
- 
Brake operating lever, $12 each, two available
Brake band with operating cam, needs new lining, $12
Brake band with operating cam, has a good lining, $25
- 
RH brake housing with operating lever, cam, and band
(needs new lining), $30
- 
RH brake housing with operating lever, cam, and band
(usable lining), $35
Planter drive, $15
351106 R1Brake drum: $15, four
available
Brake shaft, $10
Brake pedals from a C, $8 each
(no springs)
Brake pedal stop, $5